Navigator

Home

Terminology

Overview of range

FAQs

Links

Fixings explained

Small plastic rollers

Light duty steel rollers

Heavy duty steel rollers

Skatewheels

Small print

Contact us

Key			P40	P50	P60	Details
	Fixing	11 MS SL	*	*	*	Tubes:Shatter-resistant ABS.
SL	Spring loaded	11 MS WL	*	*	*	Tube colour: Standard light grey
WL	Wire locked	11 MS NF	*	*	*	Optional blue on most sizes
NF	No fixing	11 SS SL	*	*	*	Bearing: Acetal thermoplastic races.
TAP	Internal tapped	11 SS WL	*	*	*	Colour: Yellow
NA	No axle	11 SS NF	*	*	*	Ball bearings: Spec 420 stainless steel
NAB	No axle - Blind bearing	11X MS SL	*	*	*	Temperature range: -40 to +80 degrees C
SA	Stub axle	11X MS WL	*	*	*	The blind bearing option seals the tube from
SAB	stub axle - Blind bearing	11X MS NF	*	*	*	water or dust. Bearing can still be flushed out.
ND	Nylon dome nut	11X MS TAP	*	*	*
SN	Stiff nut	11X SS SL	*	*	*
		11X SS WL	*	*	*
	Axle material	11X SS NF	*	*	*	W is the width between frames
MS	Self colour	11X SS TAP	*	*	*	H is the dimension over the bearing hubs
	mild steel	11X NA	*	*	*	F is the face length
SS	Spec 303	11X NAB	*	*	*	A is the axle length
	stainless steel	10 MS SL	*	*	*	Please refer to the Terminology page
		10 MS WL	*	*	*	Nominal dimensions in millimetres
	Axle or screw	10 MS ND	*	*	*
	diameter	10 MS SN	*	*	*	P60
11	11 diameter	10 MS NF	*	*	*	Width range:100mm - 1000mm
11X	11 mm across	10 MS TAP	*	*	*	Load rating:25 Kg UDL (no impact loads)
	flats hexagonal	10 SS SL	*	*	*	H=W-3 A=W+31 for 10 ND
10	10 mm diameter	10 SS WL	*	*	*	F=W-14 A=W+27 for 10 SL
8	8 mm diameter	10 SS ND	*	*	*	F=W-21 for SA and 11 SL
6	6 mm diameter	10 SS SN	*	*	*	P50
		10 SS NF	*	*	*	Width range:100mm - 1000mm
*	Standard	10 SS TAP	*	*	*	Load rating:20 Kg UDL (no impact loads)
	option	10 NA	*	*	*	H=W-3 A=W+25 for 8 ND
o	Available	10 NAB	*	*	*	F=W-14 A=W+31 for 10 ND
	on request	8 MS SL	*	*	o	H=W-10 for SA A=W+27 for 8 SL, 10 SL
	only	8 MS WL	*	*	o	F=W-21 for SA and 11 SL
		8 MS ND	*	*	o	P40
P60	60 mm diameter	8 MS SN	*	*	o	Width range:100mm - 800mm
	plastic roller	8 MS NF	*	*	o	Load rating:15 Kg UDL (no impact loads)
		8 SS SL	*	*	o	H=W-3 A=W+25 for 8 ND
P50	50 mm diameter	8 SS WL	*	*	o	F=W-11 A=W+31 for 10 ND
	plastic roller	8 SS ND	*	*	o	H=W-10 for SA A=W+27 for 8 SL, 10 SL
		8 SS SN	*	*	o	F=W-18 for SA and 11 SL
P40	40 mm diameter	8 SS NF	*	*	o	W48R & W48Y
	plastic roller	8 NA	*	*	o	Acetal skatewheel 48 mm dia
		10 SS SA	*	*	o	with load rating of 10 Kg
		10 SS SAB	*	*	o	24 mm over hubs and 15 mm wide 'tread'
		10 MS SA	*	*	o	Yellow wheels with spec 420 stainless balls
		10 MS SAB	*	*	o	Red wheels with carbon chrome balls

Tubes: Shatter-resistant ABS. Grey in colour

Bearing: Acetal thermoplastic races. Yellow in colour

Balls are spec 420 stainless steel

Temperature range: -40 to +80 degrees Centigrade

Back to Top